The upcoming 3D-printing revolution in microfluidics
2016-05-23
org.kosen.entty.User@709a029d
이대식(handasom1)
행사&학회소개
1. The manufacturability roadblock
2. 3D printed microfluidic systems come in different flavors
2.A. By setereolithography
2.B. By multi jet modling (photopolymer inkjet printing)
2.C. By fused deposition modeling
3. Transition from soft lithography to 3D-printing
3.A. Advantages and disadvantages of PDMS molding
3.B. Creitical barriers that have prevented the adoption of 3D-printing
3.C. Overcoming the critical barriers
3.D. The promise of 3D printing
4. Conclusions
2. 3D printed microfluidic systems come in different flavors
2.A. By setereolithography
2.B. By multi jet modling (photopolymer inkjet printing)
2.C. By fused deposition modeling
3. Transition from soft lithography to 3D-printing
3.A. Advantages and disadvantages of PDMS molding
3.B. Creitical barriers that have prevented the adoption of 3D-printing
3.C. Overcoming the critical barriers
3.D. The promise of 3D printing
4. Conclusions
보고서작성신청
지난 20년간 미세유체시스템의 대부분은 PDMS 미세몰딩에 기반한 기술 즉, 소프트리소그래피에 의한 PDMS로 제작되었다. PDMS의 우수한 물성이 소프트 리소그래피가 가능하게 하였다. 즉, 생체친화적이고, 탄성이있고, 투명하고, 가스투과되고, 물은 투과되지 않고, 가격이 저렴하고, 특허가 없고, 단순 공정으로 고행상도의 구조를 재빨리 시제작이 가능하다는 것이다. 하지만 통산적인 공정이 사람의 손이 많이 가고, 3D의 복잡한 형상의 몰딩이 어렵다는 면에서 실험실에서만 주로 사용되고 있다. 3D-프린팅 기술은 최근에 자동화되고, 별도 조립이 필요없는 3D 제조, 가격 낮춤, 빠르게 향상되는 해상도 및 처리량의 장점으로 매력을 끌고 있다. 여기서, 3D-printing 에 의한 미세유체제어 시스템의 제작 기술동향에 대해서 리뷰하고 있다. 관련된 연구자 및 해당 분야에 관심이있는 독자들에게 매우 유용한 정보를 제공해 주리라 사료된다.